Course Search | Northcentral Technical College

BLS (Basic Life Support) CPR 47531437

0.10 credits

Emergency Medical Services

$40.00

This American Heart Association approved course covers adult and pediatric CPR and FBAO, two-rescuer CPR, barrier devices and AED. The course focuses on the needs of the professional caregiver. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

2 Course Sections

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD034 Spring	Open	03/17/2025	03/17/2025	In-Person	Antigo Campus	Mar 17 Monday 05:30 PM - 09:30 PM T103 - Classroom - Antigo Campus Diane McKinney	$40.00
#PD044 Spring	Open	05/15/2025	05/15/2025	In-Person	Antigo Campus	May 15 Thursday 05:30 PM - 09:30 PM T103 - Classroom - Antigo Campus Linda Vollmar	$40.00

Industry Workplace Safety 10620172

1.00 credits

Electromechanical Technology

Introduces General Industry Safety Practices and is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. An OSHA 10 General Industry certification will be obtained with completion of the course. In addition, lab specific safety will be covered. OSHA has some very specific rules for receiving the certification card for OSHA 10. OSHA 10 Cards can only be issued to students in the face-to-face classes who attend every class. OSHA will not allow anyone taking this course in an online/flex format to receive a certification card. If you need the OSHA 10 card upon completion of this course, please be sure you are enrolled in the face-to-face section.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Intro To Microcontrollers 10660121

1.00 credits

Electronics Foundation

Introduces the microcontroller, a tiny computer which uses digital inputs and outputs to control electrical/electronic circuits. A Basic Stamp microcontroller will be programmed via a USB port to a PC using a PBASIC editor program. It will then be connected to digital inputs such as switches and sensors and used to control output circuits such as LED displays, DC motors, relays, buzzers and servo motors.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Fluid Power Systems 1: Fundamentals 10612120

1.00 credits

Fluid Power Technology

Introduces Fluid power systems used in industry. The advantages and disadvantages of fluid power compared to other power transmission systems are examined. The potential dangers are explored and the safety procedures related to fluid power are reviewed and implemented. The application of principles of fluid power transmission and the formulas used in fluid power system analysis and design are experienced in the lab. The fundamental principles, components, symbols and applications of hydraulic and pneumatic fluid power applications are introduced. Basic power and control circuits are developed using computer aided design and simulation software and then connected and tested in the lab.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

PLC 1: PLC Fundamentals And Bit Based Instructions 10620164

1.00 credits

Electromechanical Technology

Introduces PLC hardware setup, software applications and system configuration. Basic industrial control problems are solved using Bit Based Instructions. Various kinds of sensors and other input devices will be applied to the PLC. Output devices will be controlled by the PLC.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Mechanical Systems 1: Basic Machine Components 10620157

1.00 credits

Electromechanical Technology

Introduces how machines work and basic mechanical power transmission system components.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Industrial Electronics Technology 1 - Direct Current Electrical Characteristics 10660123

1.00 credits

Electronics Foundation

Introduces the fundamental principles of direct current (DC) and the effects of resistance, capacitance and inductance operating within the DC electrical and magnetic fields. Circuit analysis utilizes project based labs where students experience the practical application of Ohm’s, Watt’s, Kirchhoff’s and Lenz’s laws. Learning experiences in IET 1 will be continued and expanded upon in IET 2.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Industrial Motors 1: Electric Motors 10620159

1.00 credits

Electromechanical Technology

Introduces industrial motors including the most common types of AC and DC motors. The potential dangers of Industrial motors are explored and the application and safety standards related to electric motors are reviewed and implemented. Labs include motor load and efficiency testing utilizing digital power, speed and torque measurement devices.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Electromechanical Troubleshooting 10620173

1.00 credits

Electromechanical Technology

Introduces troubleshooting methods that apply to basic motor control circuits, PLC applications, VFD applications & mechanical system applications. Troubleshooting methods are practiced using hands-on lab activities. Preventive & predictive maintenance techniques are also explored.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Electrical Fabrication 10660118

1.00 credits

Electronics Foundation

Develops the principles of electrical fabrication. Emphasis will be given to the practical application of interpreting engineering drawings, wiring machine components and troubleshooting electrical panels.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

PLC 2: Timers, Counters And Program Control 10620165

1.00 credits

Electromechanical Technology

Incorporates PLC Timer, Counter and Program Control instructions used in industrial manufacturing processes.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Industrial Electronics Technology 2 - Alternating Current Electrical Characteristics 10660124

1.00 credits

Electronics Foundation

Introduces the fundamental principles of alternating current (AC) and the effects of resistance, capacitance and inductance operating at 60 Hertz (Hz) single phase within the AC electrical and magnetic fields. Circuit analysis uses project based labs where students experience the practical application of Ohm’s, Watt’s, and Faraday’s laws. Learning experiences in IET 2 build upon those in IET 1 and will be continued and expanded upon in IET 3.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Mechanical Systems 2: Power Transmission Systems 10620158

1.00 credits

Electromechanical Technology

Incorporates the detailed study of mechanical power transmission system components. Included are gear, belt, chain and screw drive systems. Lab experiments include the selection, installation and maintenance of mechanical power transmission components and systems.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Machine Control 3: Sensors And Machine Safety 10620153

1.00 credits

Electromechanical Technology

Introduces solid state motor controls and proximity and photo sensors. Machine sequence control circuits are developed using programmable logic relays (PLRs) with computer based ladder logic programming and simulation software and then connected and tested in the lab.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Dustin Van De Weerd	View Rates

Fluid Power Systems 2: Fundamentals Of Pneumatics 10612121

1.00 credits

Fluid Power Technology

Introduces Pneumatic fluid power systems. The characteristics and dangers of using air as a fluid power force are explored. Pneumatic system components are studied including: compressors, linear actuators, rotary actuators and pneumatic tubing. Hands-on activities using various pneumatic components are assembled in the lab.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

PLC 3: Data, Math, Sequencer And Shift Instructions 10620166

1.00 credits

Electromechanical Technology

Incorporates Data, Math, Sequencer and Shift Register control instructions used in industrial manufacturing processes.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Industrial Electronics Technology 3 - Electronic Circuits And Devices 10660125

1.00 credits

Electronics Foundation

Introduces the fundamentals associated with the properties of silicon controlled devices used in industry. Both DC and AC operating characteristics will be explored as well as the application of silicon controlled devices used in industrial circuit controls. Circuit analysis utilizes project based labs where students experience the practical application of skills learned in IET 1 and 2.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Industrial Electronics Technology 4 - Electrical Systems 10660126

1.00 credits

Electronics Foundation

Introduce the concepts of electrical systems including transformers, the potential dangers of electrical power and the application and safety standards related to electrical power components. Utility, industrial and alternative power generation and distribution systems are discussed. Advanced concepts including power factor correction are covered. Laboratory activities are performed to verify the theory.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Bryan Schroder	View Rates

Machine Control 1: Ladder Logic Fundamentals 10620151

1.00 credits

Electromechanical Technology

Introduces ladder logic symbols and diagrams used in industrial control circuits. Safety standards and procedures are reviewed and implemented. Discrete industrial devices are also studied including switches, relays, timers, and motor starters.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Machine Control 2: Motor And Actuator Control 10620152

1.00 credits

Electromechanical Technology

Develop motor and other actuator control and power circuits. The student will utilize typical industrial manufacturing controls. Basic machine sequence control circuits are developed using computer aided design and simulation software.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Benjamin Knospe	View Rates

Industrial Motors 2: DC/AC Variable Speed Motor Drives 10620160

1.00 credits

Electromechanical Technology

Introduces industrial motor drives including the most common types of DC and AC variable speed motor drives. Constant speed, torque and power operation modes, as well as the various solid state motor drive power control schemes and applications are discussed. Remote control and monitoring signals and system integration techniques are introduced. Labs include multiple vendor motor drive programming, connection, integration and testing as well as drive network communications, control and monitoring.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	03/31/2025 – 05/23/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Mar 31 – May 23 - T112 - IEM Lab - Antigo Campus Matt Jacobson	View Rates

Weld Inspection & Testing 10442163

1.00 credits

Welding

Emphasizes measurement of weld defects and assessment of weld quality conformance to common welding codes. Learners conduct etch tests, bend tests and break tests on welds. The process of procedure and welder qualification is explored through group activities.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Welding Safety 10442172

1.00 credits

Welding

Prepares learners for safe operation of work site equipment. Procedures regarding welding machines, band saws, shears, grinders, oxy fuel equipment and an array of hand tools are practiced. Crane and forklift operation are introduced.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Introduction To Welding 10442101

1.00 credits

Welding

Compares equipment and techniques used in the major arc welding and thermal cutting processes. Learners perform introductory level welds in the SMAW, GMAW, FCAW and GTAW processes. Learners also perform material preparation skills including shearing, grinding and thermal cutting.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Weld Print Reading 1: Basic Views And Dimensions 10442181

1.00 credits

Welding

Develop print interpretation skills needed in metal fabrication. Learners study orthographic projection, dimensioning, welding symbols and bill of materials. Learners apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Weld Print Reading 2: Other Views And Symbols 10442182

1.00 credits

Welding

Builds on print interpretation skills developed in Weld Print Reading 1. Learners study increasingly complicated prints and welding symbols. Learners will apply concepts in hands-on activities, practicing basic layout skills and safe operation of saws, shears and drills.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Flux Cored Arc Welding 1: Theory, Maintenance And Set-up 10442194

1.00 credits

Welding

Learn basic Flux Cored Arc Welding theory & set-up. After obtaining a basic understanding of the welding process in theory students turn to the welding lab for exciting experimental lab activities to proof out accepted FCAW welding techniques. Weld quality is assessed per AWS D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Thermal Cutting 10442173

1.00 credits

Welding

Develops skill in thermal cutting and gouging processes. Learners practice manual and machine oxy-fuel cutting, plasma cutting and gouging and air carbon arc gouging.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Flux Cored Arc Welding 2: .045 Diameter Wire 10442195

1.00 credits

Welding

Make fillet and groove welds in all positions using .045" flux cored wire. Assessments for this course are 100% lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Flux Cored Arc Welding 3: Submerged Arc Welding & 1/16 Diameter Wire 10442196

1.00 credits

Welding

Make fillet and groove welds using 1/16 diameter flux cored wire. In addition, students perform fillet welds in the flat and horizontal positions with the submerged arc welding process. Assessments for this course are 100 % lab based with a focus on weld quality and technique. Weld quality is assessed per D1.1 - Structural Steel Code.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Tungsten Arc Welding 1: Carbon Steel, Flat And Horizontal Positions 10442197

1.00 credits

Welding

Learn to setup GTAW equipment, and process fundamentals and variables. You’ll make fillets and grooves in the horizontal position on Carbon Steel. This course is the foundation for the other GTAW courses.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Tungsten Arc Welding 2: Carbon Steel, Vertical And Overhead Positions 10442198

1.00 credits

Welding

Create fillet and groove welds in the vertical and overhead positions on Carbon Steel.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Tungsten Arc Welding 3: Stainless Steel 10442199

1.00 credits

Welding

Create fillet and groove welds in the Horizontal and Vertical positions on Stainless Steel. Pulsed TIG will also be introduced and applied.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Tungsten Arc Welding 4: Aluminum 10442200

1.00 credits

Welding

Create fillet and groove welds in the Flat and Horizontal positions on Aluminum.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Gas Tungsten Arc Welding 5: Pipe And Tubing 10442201

1.00 credits

Welding

Use the GTAW process to create fillet welds in the 2F and 5F positions on pipe to plate. You will also explore groove welds in the 5G and 6G positions on pipe.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#91 Spring	Open	04/01/2025 – 05/21/2025	04/05/2025	In-Person Open Labs	Antigo Campus	Apr 1 – May 21 - T110 - Welding Shop/Lab - Antigo Campus Jesse Richardson	View Rates

Food Safety & Sanitation Certification 47303476

0.30 credits

Foods

$109.00

This state approved course prepares you for the National Restaurant Association Certification examination from the Department of Health and Social Services by providing managers and employees in the food-service industry the knowledge of food-safety procedures. By taking this state approved course and passing the certification examination, you will be eligible to apply for your Certified Food Manager License from the Department of Health and Social Services. The National Restaurant Association certification examination is the third night of the course. Textbook required from the NTC Bookstore.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD023 Spring	Open	04/01/2025 – 04/15/2025	03/28/2025	In-Person	Antigo Campus	Apr 1 – Apr 15 Tuesday 08:30 AM - 12:30 PM T117 - Classroom - Antigo Campus Rich Neumann	$109.00

Small Business Entrepreneurship 47102432

0.50 credits

Business Administration

$150.00

This hybrid course is designed to provide aspiring entrepreneurs with the knowledge and skills they need to start and grow their business. The Small Business Entrepreneurship will cover topics including financing, accounting, legal structure, marketing, and development of business plan, essential to starting and operating a small business.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD002 Spring	Open	04/14/2025 – 05/03/2025	04/22/2025	Attend Your Way Zoom Available	Online Wausau Off Campus	- Online May 3 Saturday 09:00 AM - 04:00 PM Wausau Off Campus	$150.00

Creating Mosaics 60815106

0.25 credits

Art

$89.00

Tempered glass, otherwise known as crash glass, is a versatile material that when used as an overlay adds shimmer to an acrylic painting. Students will use tempered glass, as well as some precut stained glass pieces if desired, over an acrylic paint creation to produce compositions filled with unexpected visual interest.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD003 Spring	Open	04/14/2025 – 04/21/2025	04/20/2025	In-Person	Antigo Campus	Apr 14 – Apr 21 Monday 05:30 PM - 08:30 PM WT131 - Antigo Campus - Lab/Classroom - Antigo Campus WTPD Contracts	$89.00

Food Safety Recertification Refresher 47303477

0.10 credits

Foods

$99.00

This course prepares students to successfully complete the ServSafe Manager exam with 2 hours of instructor led exam prep and completion of the standardized exam. The course will cover key concepts, regulations, and certification requirements. Note: Due to frequent changes in food safety regulations that are included on the exam, it is strongly recommended that students take the full certification course to ensure successful completion of the exam and license renewal.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD021 Spring	Open	04/15/2025	04/11/2025	In-Person	Antigo Campus	Apr 15 Tuesday 08:30 AM - 12:30 PM T105 - Classroom - Antigo Campus Rich Neumann	$99.00

Portable Sawmill Clinic 47465556

0.45 credits

Wood Manufacturing Technology

$400.00

Attendees of this workshop will be exposed to the entire process of turning logs into lumber with a portable sawmill. Geared towards curious and new sawyers alike, participants will dive into the how to break down logs into lumber sustainably and understand the business aspects from log quality and sourcing to manufacturing processes and product markets.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD003 Spring	Open	04/25/2025 – 04/26/2025	04/25/2025	In-Person	Antigo Campus	Apr 25 – Apr 26 Friday, Saturday 08:00 AM - 05:00 PM WT108B - Antigo Wood Tech Classroom - Antigo Campus Logan Wells	$400.00

Babysitting Certification 47531506

0.20 credits

Emergency Medical Services

$71.00

This American Red Cross Babysitting Certification course will prepare youth to be safe, effective, and responsible babysitters. The training is designed to provide universal skills in areas that every babysitter should know, including basic care for infants and children, basic First Aid, child behavior and appropriate activities, emergency protocols, and more.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD015 Spring	Open	05/03/2025	05/03/2025	In-Person	Antigo Campus	May 3 Saturday 08:00 AM - 03:30 PM T103 - Classroom - Antigo Campus Andrea Lerch	$71.00

BLS (Basic Life Support) CPR Refresher 47531438

0.10 credits

Emergency Medical Services

$35.00

This American Heart Association approved course is a refresher for those already meeting requirements for CPR as a Healthcare Provider. Successful completion includes American Heart Association certification that is valid for two years. Textbook required, can be purchased at NTC's Campus Store.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD024 Spring	Open	05/05/2025	05/05/2025	In-Person	Antigo Campus	May 5 Monday 06:00 PM - 09:00 PM T103 - Classroom - Antigo Campus Linda Vollmar	$35.00

Basic Rider Course (BRC) 42816409

0.40 credits

Motorcycle

$266.09

The 17- hour Basic Motorcycle Rider course, including online ECourse and in person instruction, is designed for beginning riders and was developed by the Motorcycle Safety Foundation (MSF). Instructors are certified by the MSF and Wisconsin Department of Transportation (WisDOT). It is taught off-street, out of traffic, and motorcycles and helmets are provided. The course consists of 1 hour of classroom and 11 hours of on-cycle instruction. In addition there is a 5 hour ECourse that must be completed prior to class (fees for ECourse separate from course fee). The Basic Rider Course covers preparing to ride, turning, shifting and braking, street strategies, special situations, increasing riding skills, maintenance and insurance.

1 Course Section

Section	Status	Start/End Date	Register By	Instruction Mode	Campus	Meeting Information	Cost
#PD024 Spring	Waitlist	05/10/2025 – 05/11/2025	04/29/2025	In-Person	Antigo Campus	May 10 – May 11 Sunday, Saturday 08:00 AM - 02:30 PM ANTIGO_LOT - Antigo Campus Parking Lot - Antigo Campus Scott Anderson May 10 – May 11 Sunday, Saturday 08:00 AM - 02:30 PM T108 - Classroom - Antigo Campus Scott Anderson	$266.09